Thursday, May 14, 2015

Halfway

Both inboard sides have been glassed and two fill coats applied. Tomorrow I'll flip them and do the other sides after a light sanding. Saturday will see biaxial along the keels.


2 comments:

  1. Nice curve to those hull sides - not too much faring?

    ReplyDelete
  2. I'm doing the fill coats with a roller so they are pretty smooth. Then I'm busting the epoxy down to 100 and priming. I'll sand primer down to 220 or so and do any other fairing then. As Rory said he just sanded to 60 by hand and painted. I'm ready to get it on, but I'm going to try to make her look a little presentable.

    ReplyDelete